Tuscan Potbelly Wall Planter
$2.99 Tuscan Potbelly Wall Planter
Published 2018-07-23T14:36:07+00:00
Hi, if you like this check out my other creations and support me here.
Bring a little touch of the Mediterranean to your garden or balcony, a little patch of green to brighten your day,
A group of these potbellied planters on a wall can give you the garden you always wanted even if space is tight.
At 1.2L capacity they can accomodate many different plants from suculants to ornamentals to kitchen herbs and there is nothing like fresh herbs on your takeaway.
The bracket helps support the pot while the screw on the pot holds it secure in winds. The inbuilt drain holes make sure your plants never get 'wet feet' and their place ment drains straight to the pot below.
Designed for FDM printing
Pot
Layer height 0.1mm
Walls 0.8mm
Speed 60mm/s
Infil 20% cubic (for strength)
Size of pot 199mm x 140mm x 209mm and 209grams
Print time 1day 8h 37min
Bracket
Layer 0.1mm
Walls 1.2mm (for strength)
Infill 25% cubic (for strength)
Size of bracket 154mm x 55.6mm x 117mm and 125grams
Print time 15h 59min
I printed the pot standing up and the bracket on its back for max strength of layers and both on rafts (easier to remove), the three in the pics I printed from one 1kg spool. Neither one needs support.
发表的日期 | 23/07/2018 |
Price | $2.99 |
让时间去下载 | 5040 - 分钟 |
材料数量 | 334grams |
尺寸大小 | 264mm x 154mm x 199mm |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |