Quinto Vent Chandelier
$4.50 Quinto Vent Chandelier
Published 2018-04-03T09:42:23+00:00
Hi, if you like this check out my other creations and support me here.
This the third in the series of T Light Chandeliers that get bigger and more complex, from three now five, they can be used singularly, in size groups or mixed and matched as you want.
You can use LED Tealights instead of burning ones for peace of mind - they will fit too.
Inspired by the tube worms that live around Hydrothermal vents at depths of around 2.5 km this series of Chandeliers uses T Lights to their best advantage by grouping them together increasing their light out-put.
They lend an elegant functionality to any dining table or home, while mimmicking the gentle sway of marine environs.
I have included a file 'T Vent Quinto f_m.stl' it is an update with a larger hole for a 38mm tealight and a dimple to help keep the flame away from the plastic. You can also use LED tealights if you wish.
Print time, a tad over a day
I have had to stop at 5 as the next (6) would be too tall to print. Nope... I found a way, have a look.
I used a raft for this print as it makes removal from the print plate just so much easier and the tallest holder is getting a little fragile.
Layer height 0.1mm
Walls 0.4
Infill 25%
Print speed 60mm/s
Adhesion- Raft
No support
Date published | 03/04/2018 |
Price | $4.50 |
Benoetigte Zeit | 1717 - Minuten |
Menge an Filament | 187grams |
Dimensionen | 140mm x 140mm x 198mm |
Support Free | YES |