TV Remote Holder (Wall-mounted)
$0.99 TV Remote Holder (Wall-mounted)
Published 2017-09-01T20:25:22+00:00
Vertical wall mounted TV remote holder. Adhere to the wall using command strip.
Designed for a small remote (0.9" thick, 2" wide). If you like the design but need different dimensions, let me know and I'll create a new STL file for you.
Visit my website to see more designs and work I have done. www.adylinn.com
Files included: Print and Finishing Info (.txt and PDF) and License (PDF)
Recommended Print Settings:
Filament choice is not important (PLA, ABS, HIPS, PETG etc all options).
Use recommended temperature settings for filament chosen (~210 / 70 PLA, ~240 / 110 ABS).
Support required (1g / 0.12m).
Infill - 30% (stand is lightweight so extra infill helps increase weight)
Layer Height - 0.1 - 0.3mm
Speed - 50-80 mm/s or whatever you are comfortable with.
Orientation - sitting vertically, slicer should import in the correct orientation.
Material usage - 47g / 5.95m build, 14g / 1.76m support.
Print time - depends on slicer settings but on average I would estimate 3 hours 30 minutes.
| Date published | 01/09/2017 |
| Price | $0.99 |
| Time to do | 200 - 230 minutes |
| Material Quantity | 61g |